Welcome to our Online Store
Cables & Hubs
In this accessories section you can find information about the various cables and USB hubs that will work with OptiTrack cameras.
Also see OptiHub,
NaturalPoint's premium USB hub with external syncing capability.
USB Hubs, Cables & Extensions
  |
USB 2.0 Hub 7-Port D-Link $39 This D-Link model is a recommended powered USB hub for OptiTrack cameras. Note: Item includes a universal power supply (US/EU-compatible) and 10 Velcro ties. (Part #MSC1055) We recommend USB Cable : 16ft A to B for use with USB hubs. |
|
 |
USB Cable : 16ft A to B $5 For USB hubs. USB uplink cable. (Part #CBL1021) |
|
 |
USB 2.0 Active Extension Cable : 5m* $20 Extend the reach of USB hubs by 5m (16'+). This allows OptiTrack cameras to be located farther from the computer for larger capture volume sizes. Cables can be used in series (up to 3) for longer distances. (Part #CBL1015) * Avoid using between cameras and USB Hubs |
|
 |
USB Cables High Grade Our high grade USB cables help you get the best performance, 24 gauge wire ensures that your OptiTrack cameras get maximum power for illumination. USB A to Mini-B connector. |
|
USB Cable High Grade : 3ft $5 (Part #CBL0005) |
|
|
USB Cable High Grade : 6ft $7 (Part #CBL0006) |
|
|
USB Cable High Grade : 16ft $10 (Part #CBL0007) |
|
For Full Body Capture: USB Cables: 5m (16ft)
Our high grade 2.0 cables help you get the best performance.
USB "A" Male to "Mini-B" Male connector.
View USB Cable Connector Comparison.
5m USB cables should be plugged into ports on the back of PCs. Read more »
 |
USB Cable High Grade, Left-Angle : 5m $10 This cable's Left-Angle connector routes the cable to the back of the camera, allowing for easy strain-reliefing with the built-in Velcro tie. This cable is recommended for most mocap setups. This is the recommended cable for most mocap setups involving truss or tripods. (Part #CBL0018) |
|
 |
USB Cable High Grade, Straight : 5m $10 This cable's Straight connector routes the cable out the side of the camera to avoid interfering with objects directly behind the device. The built-in Velcro tie allows for easy strain-reliefing. This cable is recommended for tight mounting situations or when the rear-facing Left-Angle will not work. (Part #CBL0015) |
|
For Face Capture: USB Cables: 2m (6ft)
Our high grade 2.0 cables help you get the best performance.
USB "A" Male to "Mini-B" Male connector.
View USB Cable Connector Comparison.
 |
USB Cable High Grade, Left-Angle : 2m $7 This cable's Left-Angle connector routes the cable to the back of the camera, allowing for easy strain-reliefing with the built-in Velcro tie. This cable is recommended for most mocap setups. This is the recommended cable for most mocap setups involving truss or tripods. (Part #CBL0017) |
|
 |
USB Cable High Grade, Straight : 2m $7 This cable's Straight connector routes the cable out the side of the camera to avoid interfering with objects directly behind the device. The built-in Velcro tie allows for easy strain-reliefing. This cable is recommended for tight mounting situations or when the rear-facing Left-Angle will not work. (Part #CBL0016) |
|
Sync Cables & Splitters
 |
OptiTrack Sync Cables Use these interconnect cables to synchronize the exposure timing of multiple OptiTrack cameras, or distribute synchronization between multiple OptiHubs, for maximum precision. 1 cable required per device. RCA connectors. |
|
OptiTrack Sync Cable : 3ft $4 (Part #CBL0009) |
|
|
OptiTrack Sync Cable : 6ft $6 (Part #CBL0010) |
|
|
OptiTrack Sync Cable : 15ft $8 (Part #CBL0011) |
|
|
OptiTrack Sync Cable : 30ft $10 (Part #CBL0013) |
|
 |
OptiTrack Sync Splitter $5 Replacement splitter cable that breaks out sync input and output. * Included with OptiTrack FLEX:V100R2, FLEX:V100 and FLEX:C120 cameras. (Part #CBL0008) |
|
