Welcome to our Online Store
Camera Lenses, Adapters & Cases
In this accessories section you can find information about the various lenses, lens holders, lens adapters, and enclosures for OptiTrack camera models.
See the Lens Comparison Table for FOV information specific to each camera and lens combination.
Also see the FLEX:V100R2 Lens Changing Tutorial video.
Lenses
See the Camera Lenses & Cases (Archive) to view previously stocked camera lenses.
  |
Lens M12 3.5mm F#1.6 No-Filter, Low Distortion $50 V100 cameras: 57.5° FOV. See Lens Comparison Table and FOV Calculator. If using with SLIM:V100, M12 lens holder (or: SLIM:V100 enclosure with CS to M12 lens adapter) is required. (Part #LENS0004) |
|
 |
Lens M12 4.5mm F#1.6 No-Filter, Low Distortion $50 V100 cameras: 46.2° FOV. See Lens Comparison Table and FOV Calculator. This is the stock FLEX:V100R2 lens. If using with SLIM:V100, M12 lens holder (or: SLIM:V100 enclosure with CS to M12 lens adapter) is required. (Part #LENS0003) |
|
 |
Lens M12 5.5mm F#1.6 No-Filter, Low Distortion $50 V100 cameras: 38° FOV. See Lens Comparison Table and FOV Calculator. If using with SLIM:V100, M12 lens holder (or: SLIM:V100 enclosure with CS to M12 lens adapter) is required. (Part #LENS1060) |
|
Lens Adapters
 |
CS to M12 lens adapter $9 For attaching M12 lenses to a V120:SLIM Case or SLIM:V100 Enclosure. (Part #LENS1070) |
|
 |
CS to C lens adapter $7 For attaching C lenses to a V120:SLIM Case or SLIM:V100 Enclosure. (Part #LENS1010) |
|
Additional V120:SLIM Accessories
Accessories designed for use with the V120:SLIM camera.
 |
OptiTrack V120 Case $39 Aluminum case for V120:SLIM camera. Has a CS lens mount, tripod standard 1/4"-20 mount, and various M3 and 2-56 thread mounts. (Part #CASE1030) |
|
 |
Filter Switcher $49 Solenoid-activated glass filter switch between 800nm IR Pass filter and a 700nm IR Cut Filter. Software controllable. Filter Switcher Technology enables visible spectrum video in addition to standard IR imaging for V120:SLIM cameras. (Part #LENS0011) |
|
|
Filter Plug $9 A glass 800nm IR Pass Filter for V120:SLIM cameras. (Part #HDW0028) |
|
|
Micro 9-Pin Connector $14 Bare 9-pin connector for custom break-out of camera signals. (Part #CON0058) |
|
|
Micro 9-Pin Connector Case $12 Cover case for Micro 9-Pin Connector. (Part #HDW0038) |
|
SLIM:V100 Accessories (Enclosure, Filter & Lens Holder)
Accessories designed for use with the now-retired SLIM:V100 camera.
 |
Enclosure for OptiTrack SLIM:V100 $45 Two-piece machined aluminum enclosure with integrated CS Mount Lens holder and 1/4-20 thread mounts. Dimensions: 4.5cm (w) x 4.5cm (h) x 2.4cm (d). • Filter is NOT included with enclosure. • CS to M12 lens adapter (below) is required if using M12 lenses. (Part #CASE1015) |
|
 |
800nm-Pass-Filter with mount for SLIM:V100 Enclosure $5 Filter with mounting bracket, fits SLIM:V100 aluminum enclosure. (Part #MSC1045) |
|
 |
800nm-Pass-Filter only $5 Filter only, mounting bracket not included. (Part #MSC0030) |
|
 |
Lens Holder M12 $2 For holding a lens to a SLIM:V100 camera board. Not for use with FLEX cameras or with SLIM:V100 enclosure cases. (Part #LENS1020) |
|
|
Lens Holder M12 with 800nm-Pass-Filter $7 For holding a lens to a SLIM:V100 camera board. Not for use with FLEX cameras or with SLIM:V100 enclosure cases. (Part #LENS1055) |
|
