NaturalPoint TrackIR
Users Manual
 
3. Getting Started
3.1 Minimum System Requirements

  • Windows XP/Vista
  • Pentium 800Mhz Processor
  • Five (15) megabytes of free hard disk space
  • 128 megabytes of RAM
  • Free USB Port on the computer
  • Microsoft DirectX 8.0 or higher

3.2 What's Included
TrackIR Camera
TrackIR 5 		TrackIR Quickstart Guide
Quickstart guide
Vector Clip
TrackClip

3.3 Hardware Compatibility

The TrackIR version 5.x software can only be used with the TrackIR 3 (with Vector Expansion only), TrackIR 4, and TrackIR 5 hardware. Older versions of the TrackIR are not compatible, and will not work with this software. The software will present a warning if incompatible hardware is detected

3.4 Software and Hardware Installation

Note : For best results, we recommend installing the TrackIR Software before you connect the TrackIR hardware.


3.4.1 System Restore Point
It is recommended that before installing any new hardware or software program, you set a system restore point. XP, Vista and Windows 7 provide this feature to allow you to easily reset your system to a previous state. After the software is installed and everything is working fine, set another restore point. Users that get into the habit of using this feature find they have fewer problems on their computers.

The System Restore program can be found by clicking :
XP : Start/Programs/Accessories/System Tools/System Restore
Vista / Windows 7 : Start/Search “restore”/System Restore

3.4.2 Software & Drivers Installation

Note : The TrackIR version 5.x software does not support Windows 98/ME/2000.

3.4.2.1 Windows Vista/Windows 7

  1. Visit www.trackir.com to download the latest version of the TrackIR software. Save the installer to your desktop.
  2. Right click on the installer and select "Run as Administrator" then follow installation instructions.
  3. (Note: Windows Security may display a warning message that it can’t verify the publisher of the driver software. Click to install the driver software anyway. The drivers WILL NOT harm your system.)
  4. When installation is complete, a TrackIR icon will appear on your desktop.
  5. Plug the TrackIR into a USB port on your computer. For best results, directly connect the TrackIR into a USB port on your computer. We do not recommend using a USB hub of any kind.
    TrackIR Plug USB Cable in
  6. Place the unit on top of your monitor with the front facing the same direction as the monitor screen.
  7. Double click on the newly created TrackIR icon on your desktop to open the TrackIR software program.
  8. Hold the TrackClip in front of the TrackIR unit. With the reflective material facing the TrackIR unit, slowly move the vector clip back and forth in front of the TrackIR unit from about an arm’s length away. If the left green indicator light comes on, you have installed the TrackIR unit and software correctly. If the light does not come on, please consult the troubleshooting guide at the back of this manual.
  9. If you encounter further problems with this procedure, please consult the troubleshooting guide at the end of this manual.
  10. To ensure compatibility with recently released TrackIR Enhanced games, check for software and game updates immediately after installation. If updates are installed, restart the software.

3.4.2.2 Windows XP

NOTE: Windows XP users must be logged in as an administrator. If you only have one user set up on your computer, you most likely already have administrator privileges.
  1. Visit www.trackir.com to download the latest version of the TrackIR software. Save the installer to your desktop.
  2. Right click on the installer and select "Run as Administrator" then follow installation instructions.
    Note: Windows may display a warning message about the drivers not being signed. Click YES to accept the drivers; the drivers WILL NOT harm your system.)
  3. A new TrackIR icon will appear on your desktop.
  4. Plug the TrackIR into a USB port on your computer. For best results, directly connect the TrackIR into a USB port on your computer. We do not recommend using a USB hub of any kind.
    TrackIR Plug USB Cable in
  5. Place the unit on top of your monitor with the front facing the same direction as the monitor screen.
  6. The Windows XP Found New hardware Wizard should appear once you plug in your TrackIR.
  7. The Wizard will indicate that is has found the NaturalPoint TrackIR, and ask if you would like Windows to install drivers for the hardware automatically, or choose from a list of drivers in a specific location.
  8. Select “Install Automatically.”
  9. NOTE: A Hardware Driver Install Warning message will appear after you have selected Install Automatically. Click on the button labeled “Continue Anyway” and Finish. (This WILL NOT harm your computer).
  10. Windows XP will now display a message indicating that it has finished installing the NaturalPoint TrackIR.
  11. It is recommended that you restart your computer after installation.
  12. After reboot, double click on the newly created TrackIR icon on your desktop to open the TrackIR software program. Your computer may briefly display a message indicating that it is installing the drivers for the TrackIR.
  13. Hold the TrackClip in front of the TrackIR unit. With the reflective material facing the TrackIR unit, slowly move the vector clip back and forth in front of the TrackIR unit from about an arm’s length away. If the left green indicator light comes on, you have installed the TrackIR unit and software correctly. If the light does not come on, please consult the troubleshooting guide at the back of this manual.
  14. If you encounter further problems with this procedure, please consult the troubleshooting guide at the end of this manual.
  15. To ensure compatibility with recently released TrackIR Enhanced games, check for software and game updates immediately after installation, and then restart the software.

 
3.5 Hardware Placement

Using the mounting base, you can secure the TrackIR to any computer display, including flat panel, laptop, and CRT screens. Attach the camera to base using the magnetic connector. The base may be disconnected from the camera as needed.

TrackIR Plug USB Cable in

Place the unit on your monitor facing you. Adjust the legs on the base to either clip to your monitor or sit atop it.

TrackIR Plug USB Cable in

Position the camera so your head is in the center of its view.

Position the device further away if you’d like more room to move around. (We recommend between 2 and 5 feet.)

TrackIR Plug USB Cable in

When using the TrackClip PRO, position the TrackIR camera on your monitor so the TrackClip PRO’s LEDs are in the center of the camera's view.

TrackIR Plug USB Cable in

Once you have positioned the camera, secure the USB cable with the strain relief clip in the base.

TrackIR Plug USB Cable in